... is empty!
 

  

receive regular emails about new products and special offers!
get adobe acrobat for free, to view our pdf documents



Datasheet
 

CoolRoadRunner-III

PC/104 Intel® Celeron® Processor CPU Board

  • 650 MHz Intel® Low Power Celeron
  • Up to 512 Mbyte SDRAM
  • CompactFlash™ Socket
  • SXGA:1280 x 1024,TFT:1024 x 768
  • LVDS
  • 10/100 BaseT Ethernet
  • 2 x USB
  • Small power consumption:~10 watts
  • No active cooling
  • Supervision LED for power, watchdog, Ethernet and custom purpose
  • TV-Out
  • Sound I/O AC97 compatible
  • 2 independent watchdogs
  • Flash BIOS
  • GoldCap for backup
  • Expandable via PC/104 bus
  • The CoolRoadRunner-III provides embedded PC applications with the power of a contemporary Pentium processor. It is an All-in-One single board computer conforming to the PC/104-Plus standard.

    It comes with fast AGP4x graphics, 10/100 BaseT Ethernet and AC-97 Cound I/O on-board. The CoolRoadRunner-III offers a CompactFlash™ socket and an ATA-6 (Ultra DMA-100) compliant EIDE interface. The system's main memory is expandable up to 512 MB SDRAM according to the applications requirements via the on-board SODIMM socket. The core of the board is the Ultra-Low Voltage Intel® Celeron® Processor running at either 400 MHz or 650 MHz. This processor is optimized for low power consumption and therefore ideally suited for mobile applications, where usually only a small power supply is available. It is fully compatible with previous x86 processors and provides plenty of features like support for MMX® technology and for streaming SIMD extensions, thus ensuring very good floating point performance. The infrastructure of the board is provided by a VIA® TwisterT chipset with an integrated Savage4 graphics accelerator from S3. With up to 32 MB of graphics memory, resolutions as high as 1600 x 1200 at 16.7 million colours are supported. In addition to ordinary SVGA-monitors all kinds of LCD and TFT Flat Panels can be connected through either the 2-channel LVDS or the 18-bit parallel TFT interface. The board also provides a TV-Out port supporting both standards, NTSC and PAL as well as CVBS and S-Video. The integrated AC97 compliant audio subsystem gives full sound capabilities. Beside the usual serial and parallel ports there are two USB and one IrDA interface integrated on the board, providing connectivity to all sorts of peripherals. Local mass memory may be added with the CompactFlash™ header, which can be used with all contemporary CF modules. For easy troubleshooting are supervision LEDs for power, watchdog, Ethernet and custom purposes integrated on the board. System expansion is made very easy using the PC/104-Plus buses.


    Third party trademarks are the property of their respective owners.

    © 2002 DataBoards (UK) Limited. All rights reserved.
    All images and text are copyrighted and may not be re-used.
    Home - Contact us - Sitemap