12-bit PCMCIA Data Acquisition Cards 100 kS/sec sampling, 12-bit analog input resolution Two 12-bit D/A channels Eight single-ended or four differential A/D channels, expandable to 128 Channels Eight digital I/O Channels 16-bit timer/counter with auto-reload and readout latch 24-bit auto-reload pacer clock with prescalers and external clock source. Bipolar input range of ±10 volts, with standard programmable gain of 1, 2, 4 and 8 1, 10, 100, 1000 high gain option (DAQP-12H) 4K Data FIFO Programmable Scan FIFO with 2048 entries Windows 95/98/NT and windows 2000 compatible Drivers supplied for DASYLab, LabView and TestPoint CP-DAQPAM cable included
The DAQP-208 is a Type II PCMCIA data acquisition card with four differential or eight single-ended 12-bit analog input channels (expandable to 128), with a maximum sampling rate of 100 kS/sec, and programmable gains of 1, 2, 4, and 8. A high gain option is also available providing gains of 1, 10, 100 and 1000. The DAQP-208 is equipped with two 12-bit analog output channels. The output can be updated individually when writing to the corresponding D/A port, or simultaneously when a synchronization signal occurs.
The DAQP-208 has a 4K Data FIFO that will significantly reduce CPU overhead. Each of the 2048 Scan FIFO entries can be specified with an input channel and its associated gains. It has a selectable scan speed of 10ms to 40ms per channel. Data acquisition may be initiated by a trigger signal or by using the DAQP-208's pre-trigger capability.
The DAQP-208 has a 24-bit auto-reload pacer clock generating sampling rates precise up to 100 kS/sec using an internal or external clock source. It has a 16-bit timer/counter with an auto-reload and readout latch that provides independent timing for the analog output channels, and operates with internal or external clock source and gate controls.
The DAQP-208 includes the DaqSuite CD which contains the DAQDRIVE universal software driver, and the DaqEZ and DaqEZ Pro user friendly data acquisition application software packages. VisualBasic controls are also available as part of DAQDRIVE. All necessary software is included to install and configure the DAQP-208 for use with DOS, Windows 3.x, Windows 95/98/NT and Windows 2000.